Vintageview IDR3-HX - 3 Half Island Display Rack Ext Manuel d'utilisateur télécharger pdf

Half Island Display Rack

(IDR-H) Assembly Instructions

Wine Master Cellars, LLLP • 10645 E 47th Ave, Denver, CO 80239 • phone: 866.650.1500 • fax: 866.650.1501

Please feel free to contact us regarding the assembly of this product.

2. Attach racks to frame - Using a base cradling rack, and starting

on the left side of the assembled frame, align the mounting holes

in racks with the holes on crossrails. Temporarily place alignment

tool through center hole in rst rack and crossrail as shown.

After securing top and bottom of the rack with the provided WS

Assembly Screws, remove alignment tool and replace with WS

Assembly Screw. Repeat for each rack set, alternating between

base and neck racks. Fully tighten cross rail assembly screws from

step 1.

†

IDR Extension packages contain only 1/2 the quantity of noted items.

Hardware shown

actual size

3 X

WS33

WS43

4 X

†

Footer Pad

3 X

IDR-CR3

1/2 X

IDR-PR

2 X

†

IDR3-UPRIGHT

IDR4-UPRIGHT

12 X

Crossrail Assembly

Screw

3 X

IDR-PR Assembly

Screws

18 X

WS Assembly

Screw

2 X

†

IDR-PR Assembly Bolt

4 X

†

IDR-PR Assembly

Washer

Required tools: IDR-AK - included with IDR and contains an

8mm Nut Driver and Alignment Tool

Electric Screw Driver with #2 Phillips Bit

2 X 14mm (or adjustable) Wrench

1. Assemble frame - Thread footer pads into the front-bottom

of the uprights. For the rear footer pads, place a rear footer

pad washer over the shaft of a footer pad. Insert and hold a

rear footer pad nut inside the tube, aligned with the pre-drilled

hole, and thread the footer pad into the nut. Tighten all of the

footer pads with a 14mm wrench. Lay down one upright and

attach all three crossrails using the provided crossrail assembly

screws in the predrilled mounting holes. Do not fully tighten at

this point to allow for adjustments during assembly. Stand

up the rst upright and attach the second upright to crossrails.

Rear Footer

Pad Nut

2 X

†

Rear Footer Pad

Washer

2 X

†

1 X

IDR-H-PRR

1 2

Résumé du contenu

Page 1 - (IDR-H) Assembly Instructions

Half Island Display Rack (IDR-H) Assembly InstructionsWine Master Cellars, LLLP • 10645 E 47th Ave, Denver, CO 80239 • phone: 866.650.1500 • fax: 866

Page 2

3. Assemble presentation rack – Position presentation rack (IDR-PR) piece and presentation rack rail (IDR-H-PRR) back to back as shown

Commentaires sur ces manuels

Pas de commentaire

Vintageview IDR3-HX - 3 Half Island Display Rack Ext Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement Vintageview IDR3-HX - 3 Half Island Display Rack Ext. VintageView IDR3-HX - 3 Half Island Display Rack Ext User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Vintageview IDR3-HX - 3 Half Island Display Rack Ext